Hear from Our Customers
You’re not looking for “close enough.” You need parts that fit right, edges that don’t need grinding down, and materials that aren’t warped from heat.
High precision waterjet cutting in Brookhaven, NY gets you there because the process never heats your material. No heat-affected zones means no structural changes to your metals, composites, or stone. What you spec is what you get—down to tolerances of ±0.001″ when the job calls for it.
That also means you skip the secondary finishing. Parts come off the table ready to install or assemble. You’re not paying for extra machining time, and you’re not waiting another week for someone to clean up rough edges. The cut quality is smooth enough to use as-is, which saves you both time and money on every job.
We work with professionals across Brookhaven, NY who need custom fabrication done right. Whether you’re an architect specifying intricate metalwork, a contractor managing a tight build schedule, or a manufacturer producing components that can’t be off by even a few thousandths, you need a precision waterjet cutting shop in Brookhaven, NY that understands what’s at stake.
We’ve built our reputation on accuracy and turnaround time. Brookhaven’s manufacturing and construction sectors don’t have room for delays or rework, and neither do we. You send us your specs, we program the cut, and you get parts that match your drawings without the back-and-forth.
You start by sending us your design files—CAD drawings, DXF, or even a sketch if that’s what you’re working from. We’ll review your specs and material requirements to make sure the cut strategy matches what you need.
From there, we program the precision CNC waterjet cutting in Brookhaven, NY to follow your exact dimensions. The machine uses a high-pressure stream of water mixed with abrasive garnet to cut through your material. Because there’s no blade and no heat, you don’t get burrs, warping, or hardened edges.
Once the cut is complete, we inspect dimensions to confirm everything matches your tolerances. If you’re running production parts, we save the program so repeat orders are just as accurate as the first. You get consistent results whether you’re ordering one piece or a hundred.
Ready to get started?
Precision water jet cutting services in Brookhaven, NY handle materials from 1/16″ up to 10″ thick. That includes metals like stainless steel, aluminum, and titanium, plus composites, glass, stone, and plastics. If you’re not sure whether your material will work, ask—we’ll tell you straight.
You also get complex geometry without tool changes. Tight inside corners, small holes, intricate curves—the waterjet handles it all in one pass. There’s no need to switch bits or reposition the material, which keeps your costs down and your lead times short.
For manufacturers in Brookhaven, NY working with aerospace, automotive, or medical components, precision waterjet cutting for tight tolerances in Brookhaven, NY means you can meet spec requirements that other cutting methods can’t touch. When your customer demands ±0.005″ or tighter, and the material can’t be heat-treated during cutting, waterjet is often the only process that works.
Under controlled conditions, precision waterjet cutting in Brookhaven, NY can hold tolerances as tight as ±0.001″. For most production work, you’re looking at ±0.003″ to ±0.005″, which is still tighter than plasma or torch cutting by a significant margin.
The actual tolerance depends on material thickness, type, and the complexity of your geometry. Thicker materials and harder cuts will have slightly wider tolerances, but you’re still getting accuracy that beats most other cutting methods. If your project has specific tolerance requirements, tell us upfront so we can confirm whether waterjet is the right process or if you need additional machining.
What matters most is consistency. Once we dial in your cut, we can repeat it with the same accuracy across your entire production run. That’s critical if you’re manufacturing parts that need to fit together or meet regulatory standards.
Waterjet cutting uses high-pressure water and abrasive garnet instead of heat to cut through material. The stream is cold, so there’s no thermal transfer into your workpiece. That means the material’s structural properties stay intact—no hardening, no softening, no warping.
Laser and plasma cutting work by melting or vaporizing material, which generates intense heat. That heat spreads into the surrounding area and changes the metal’s characteristics, sometimes making it brittle or distorted. If you’re working with materials that have been heat-treated or tempered to specific standards, adding more heat during cutting can ruin those properties.
For industries like aerospace and medical device manufacturing in Brookhaven, NY, where material integrity is non-negotiable, precision waterjet cutting is often the only option. You’re not introducing variables that could compromise performance or safety, and you’re not creating extra work trying to reverse heat damage after the fact.
Yes. Precision CNC waterjet cutting in Brookhaven, NY works for one-off prototypes and high-volume production without needing different setups or tooling changes. Once we program your cut, we can run it once to proof your design or run it a thousand times for production.
For prototypes, waterjet is faster than traditional machining because there’s no need to create custom tooling or fixtures. You send the file, we cut it, and you’re testing your design the same day or next day. If you need changes, we adjust the program and recut—no expensive retooling required.
For production runs, the repeatability is what matters. The CNC system follows the same path every time, so part 100 matches part 1. That’s essential if you’re supplying components to manufacturers in Brookhaven, NY who need consistent fitment across assemblies. You’re not dealing with tool wear or drift that throws off dimensions halfway through a run.
Precision waterjet cutting in Brookhaven, NY cuts metals, composites, stone, glass, plastics, rubber, foam—basically anything that isn’t tempered glass or certain ceramics. For metals, that includes stainless steel, aluminum, titanium, brass, copper, and tool steels up to 10″ thick.
Composites like carbon fiber and fiberglass cut cleanly without delamination, which is a common problem with saws or routers. Stone and tile cut without cracking, and plastics cut without melting. If you’re working with materials that are heat-sensitive, brittle, or expensive, waterjet eliminates the risk of ruining your stock.
The abrasive stream is also adjustable. For softer materials, we can reduce pressure or switch to water-only cutting to avoid excessive wear on the material. For harder materials like titanium or Inconel, we increase pressure and abrasive flow to maintain cutting speed. That flexibility means you’re not limited to one material type or thickness range.
It depends on material thickness, complexity, and quantity. A simple shape in 1/4″ aluminum might take a few minutes per part. A complex pattern in 2″ stainless steel could take 30 minutes or more. Thicker materials and tighter curves slow the process down because the stream needs more time to cut through.
That said, precision water jet cutting services in Brookhaven, NY are often faster than traditional machining for complex parts because there’s no tool changing or repositioning. The waterjet cuts your entire shape in one continuous operation, which saves setup time. For production runs, we’re cutting multiple parts simultaneously by nesting them on the table, which increases throughput.
Lead time also depends on our current workload and your material availability. If you have material in stock and we have open machine time, we can often turn around simple jobs within a day or two. More complex projects or custom materials might take a week. If you’re on a tight deadline, let us know upfront so we can prioritize your job.
We can work either way. If you already have material on hand or you’ve sourced it from a specific supplier for quality or cost reasons, bring it in and we’ll cut it. If you need us to supply the material, we can source it for you based on your specs.
For projects where material selection affects performance—like aerospace-grade aluminum or medical-grade stainless—you’ll probably want to supply it yourself or specify the exact grade and certification you need. We’ll confirm that what you’re providing is compatible with precision waterjet cutting for tight tolerances in Brookhaven, NY and flag any issues before we start.
For less critical applications, we can recommend materials that balance cost and performance. If you’re not sure what thickness or grade you need, we’ll walk you through the options based on how the part will be used. The goal is to get you the right material for the job without overspecifying or underdelivering.
Local Resources
Useful Links
Other Services we provide in Brookhaven
