631-422-0888
Call: 631-422-0888
Contact Us

Serving New York, New Jersey, and Connecticut

Glass Waterjet Cutting Long Island, NY

Complex Glass Shapes Cut Without Cracking

Intricate patterns, custom shapes, and architectural details cut with precision you can see and edges you can trust—no heat, no cracks, no guesswork.
Contact Us!
Call: 631-422-0888

Built On Precision And Experience

01

CNC Controlled Accuracy

Every cut is guided by advanced CNC systems that hold tolerances measured in thousandths of an inch for flawless results.

02

In-House Design Review

Your files are reviewed by our fabrication experts before cutting begins, catching issues early and preventing costly mistakes.

03

No Heat Damage Ever

Cold water cutting means zero thermal stress on your glass—no warping, cracking, or compromised structural integrity.

40+

Years Of Experience

Precision Glass Cutting Long Island, NY

The Glass Cutting Method Built For What Others Can't Handle

When your project calls for curves that can’t be scored, details too fine for traditional methods, or shapes that would shatter under heat, waterjet cutting is the answer. Using high-pressure water mixed with fine abrasive, this process cuts through glass without generating heat or creating the stress that leads to cracks. The result is clean edges, intricate patterns, and custom shapes that fit your vision exactly—whether it’s a one-off architectural feature or a production run of identical panels. This isn’t about basic straight cuts. It’s about bringing complex designs to life in glass without compromising quality, wasting material, or hoping the piece doesn’t break halfway through. You get precision that holds tight tolerances, edges that need little to no finishing, and the confidence that what you designed is what you’ll receive.
Contact Us
Call Now

Built On Precision And Experience

01

Your intricate designs come out exactly as drawn—curves, sharp corners, tight radii, and complex patterns that other methods can’t touch.

02

Glass edges are smooth and clean right off the machine, eliminating hours of grinding, polishing, or secondary finishing work.

03

Zero heat means zero thermal stress, so your glass won’t crack during cutting or develop weak points that fail later.

04

You can cut any thickness without changing tools or processes—thin decorative panels to thick architectural glass, all with the same setup.

05

Material waste drops significantly because the cutting kerf is minimal and nesting parts efficiently maximizes every sheet of glass.

06

Projects move faster with fewer delays since there’s no waiting for specialized tooling or rework from botched cuts.

Waterjet Cut Glass Panels Long Island, NY

What's Included When You Work With Us

Before a single cut happens, your CAD files go through our in-house design review. This step catches geometry issues, verifies dimensions, and ensures your files are optimized for fabrication. It’s not about questioning your design—it’s about making sure what you drew is what gets built, the first time. Cutting happens on our advanced CNC waterjet systems that maintain precision across the entire sheet. The process handles stacking when appropriate, waterjet cutting multiple layers simultaneously to speed production while keeping parts identical. Edge quality comes out clean enough for most applications without secondary finishing, though polishing or seaming is available when your spec requires it. You also get direct communication with people who understand both the design side and the fabrication side. Questions about feasibility, lead time, material selection, or file prep get answered by the team actually running the equipment—not a sales rep reading from a script. The goal is simple: your glass shows up on time, cut right, ready to install.
Contact Us
Call Now

Architectural Glass Cutting Long Island, NY

Why Architects And Designers Choose Waterjet For Glass

When you’re specifying glass for a facade, interior partition, decorative screen, or custom installation, the fabrication method determines whether your design stays intact or gets compromised. Waterjet cutting handles the geometries that make projects stand out—radiused corners, pierced patterns, asymmetric shapes, and details measured in millimeters. Because the process is CNC waterjet controlled, repeatability is built in. If you need ten identical panels or a hundred, each one matches the CAD file and matches each other. There’s no drift, no operator variance, and no “close enough” results that create problems during installation. The cold cutting process also protects specialized glass types. Laminated glass, low-iron glass, textured glass, mirrors—materials that would be damaged or distorted by heat-based methods—all cut cleanly without delamination or surface damage. You’re not limited by what the cutting process can handle. You’re limited only by what you can design.
Contact Us
Call Now

Custom Glass Cutting Service Long Island, NY

What You Get From Waterjet Cut Glass

Beyond just “cutting glass,” this process solves the real problems you face when traditional methods fall short and precision actually matters.

01

Flawless, Burr-Free Edges: Because they use a heat-free “cold cutting” process, your signs won’t suffer from the warping, discoloration, or burnt edges common with lasers, ensuring a premium, professional finish.

File Review And Setup

Submit your CAD files and our team reviews them for accuracy, optimizes cutting paths, and confirms material specs before programming.

03

Flawless, Flush Installation: Because the materials stay completely flat and true to spec without heat distortion, dimensional letters and architectural signage install perfectly flush against walls every single time.

Quality Check And Delivery

Finished pieces are inspected against your specifications, packaged securely, and delivered ready for installation or next-stage fabrication.

02

Infinite Design Flexibility: You can cut virtually any material—from aluminum, brass, and copper to acrylic and stone—up to 6 inches thick, allowing you to execute intricate logos and complex geometries with extreme precision.

CNC Waterjet Cutting

High-pressure water mixed with fine abrasive cuts your glass following the programmed path with precision measured in thousandths of an inch.

Frequently Asked Questions

Can waterjet cutting handle intricate patterns and tight curves in glass?
Yes, and that’s exactly where waterjet cutting outperforms traditional methods. The process uses a focused stream of water and abrasive that can follow virtually any path your CAD file defines—tight inside radii, sharp corners, complex curves, pierced patterns, even asymmetric organic shapes. Because it’s CNC-controlled, the cutting head traces your design with precision that holds tolerances in fractions of a millimeter. There’s no need to etch and break or rely on scoring lines that limit your geometry. If you can draw it in CAD, we can cut it in glass. This makes it ideal for decorative screens, architectural features, custom signage, and any application where the shape is what makes the piece work.
No. Waterjet cutting is a cold process, meaning it doesn’t generate heat. That eliminates the thermal stress that causes glass to crack during or after cutting with heat-based methods like lasers or torches. The water and abrasive erode the material gradually rather than shocking it, so you don’t get the microcracks, edge chips, or structural weaknesses common with mechanical scoring and breaking. The edges come out clean and smooth, often ready to use without additional grinding or polishing. Even delicate glass types—laminated, low-iron, mirrors, textured glass—cut cleanly without delamination or surface damage. It’s the safest method for preserving both the integrity and appearance of the glass.
Our waterjet systems can cut glass from very thin sheets up to several inches thick without changing tooling or methods. Thin decorative glass, standard architectural panels, and thick structural or laminated glass all process the same way—you’re not limited by the capabilities of the equipment. Thicker glass just takes a bit longer as the stream works through more material, but the quality and precision stay consistent. This versatility means you don’t need to find different fabricators for different thicknesses or worry about whether your spec is too thick or too thin for the process to handle. One method, one setup, any thickness.
The biggest difference is heat. Laser cutting uses concentrated light energy that melts or vaporizes material, which generates significant heat. For glass, that heat creates thermal stress that can cause cracking, especially on thicker pieces or complex geometries. Waterjet cutting is a cold process—no heat, no thermal stress, no risk of the glass shattering mid-cut. Waterjet also handles a wider range of glass types and thicknesses without adjustment, whereas lasers often struggle with reflective coatings, laminated glass, or very thick material. Edge quality from waterjet tends to be cleaner and smoother right off the machine. If your priority is precision without risking the glass, waterjet is the better choice.
No, and neither can any other cutting method. Tempered glass is heat-treated to create internal stress that makes it stronger, but that same stress means cutting it causes it to shatter into small pieces immediately. This is true for waterjet, laser, saw, or any other process—it’s a property of the glass itself, not a limitation of the cutting method. If your project requires tempered glass in a custom shape, the glass must be cut to shape first, then tempered afterward. That’s standard across the industry. For non-tempered glass types—annealed, laminated, low-iron, mirrors, specialty glass—we handle them all without issue.
DXF and DWG files are preferred because they maintain vector precision and layer organization, which makes programming faster and more accurate. These formats come from AutoCAD, SolidWorks, Rhino, Fusion 360, and most CAD software. For graphic or signage work, AI or EPS files from Adobe Illustrator can work as long as paths are converted to outlines. STEP or IGES files from 3D modeling software are also usable—we extract the 2D profiles needed for cutting from them. The key is clean geometry: continuous lines, no gaps or overlaps, and only the paths that need to be cut. A clean file speeds up quoting, reduces programming time, and ensures your parts come out right the first time.

Cities we provide Glass Waterjet Cutting In