Hear from Our Customers
You don’t have time for rework. When your design calls for ±0.005″ tolerances and you’re working with stainless steel, titanium, or aluminum, heat becomes your enemy. Traditional cutting methods generate enough thermal energy to warp edges, harden surfaces, and push dimensions out of spec.
Waterjet cutting metal eliminates that problem entirely. It’s a cold process—no heat-affected zones, no material distortion, no secondary finishing to clean up burned edges. You get smooth cuts that hold dimension, even on thick plate or complex geometries.
That means faster assembly, fewer rejected parts, and less material waste. If you’re nesting parts to maximize sheet usage or cutting intricate shapes with tight inside radii, waterjet gives you the control you need without the compromises you’d accept elsewhere.
We’ve served manufacturers, fabricators, and designers across Long Island and the greater New York area for over a decade. We’re not new to this. We’ve handled everything from aerospace components to custom architectural metalwork, and we understand what’s at stake when your parts need to be right.
Deer Park sits in the middle of a dense manufacturing corridor. You’ve got automotive suppliers, medical device companies, and precision machine shops all within a few miles. That means you need a cutting partner who can move fast, communicate clearly, and deliver work that doesn’t need a second pass.
We run CNC metal waterjet cutting equipment built for accuracy and repeatability. You’re not getting a garage operation or a shop that treats waterjet as a side service. This is what we do.
You send us a CAD file or a drawing. We review it, confirm material specs, and flag anything that might cause issues—like a tolerance that’s tighter than the material can hold or a feature that would be faster to cut another way. If something looks off, we’ll tell you before we start.
Once the file is programmed, it goes to our CNC waterjet system. A high-pressure stream of water mixed with abrasive garnet cuts through your material at up to 60,000 PSI. The kerf is narrow—around 0.030″ to 0.040″—so you’re not losing material to wide cuts. And because there’s no heat, there’s no warping, no hardened edges, and no need for secondary deburring on most jobs.
After cutting, we inspect dimensions and edges. If you need additional services like deburring, bending, or welding, we can coordinate that too. Most custom metal waterjet cutting jobs in Deer Park, NY turn around in a few days, sometimes faster if you’re in a bind.
Ready to get started?
You get cuts that hold tolerance without thermal distortion. That’s the baseline. But depending on your job, you also get the ability to cut nearly any metal—aluminum, stainless steel, tool steel, titanium, brass, copper, Inconel—without changing tooling or worrying about material hardness.
Waterjet handles thick material. We’re talking 10 inches or more in some cases, while still maintaining accuracy. It also handles thin material without bending or deforming it. If your design has sharp internal corners, small pierce holes, or complex curves, waterjet can execute those features in a single pass.
In Deer Park, NY, where manufacturers are often balancing cost and speed, waterjet cutting metal offers a practical advantage: minimal scrap. The narrow kerf and ability to nest parts tightly means you’re using more of each sheet. For high-volume runs or expensive alloys, that adds up fast. You’re also avoiding multi-step processes—no rough cut, then finish cut, then deburr. One pass, done right.
We cut aluminum, stainless steel, tool steel, titanium, brass, copper, Inconel, and most other metals and alloys. Waterjet doesn’t care about material hardness the way a blade or laser does. There’s no heat generation, so even heat-sensitive materials or hardened alloys cut cleanly without affecting the material structure.
If you’re working with something unusual or you’re not sure if waterjet is the right process, send us the specs. We’ll tell you what’s possible and what’s not. Some materials—like certain composites or laminates—can delaminate under high pressure, but for metals, waterjet is one of the most versatile cutting methods available.
Thickness matters more than material type. We can cut through several inches of steel or titanium, but if you’re pushing toward the upper limits of thickness, we’ll let you know how that affects edge quality and cut speed.
We regularly hold ±0.005″ on most jobs. That’s tight enough for precision components, tooling, and parts that need to fit together without adjustment. Waterjet cutting metal in Deer Park, NY gives you that level of control because the process is CNC-driven and there’s no tool wear or heat expansion to account for.
If your design calls for tighter tolerances than that, it’s worth a conversation. Some features—like very small holes or extremely tight inside radii—can be limited by the width of the waterjet stream itself. But for the majority of precision work, waterjet delivers repeatable accuracy without the need for secondary machining.
Compare that to plasma or torch cutting, where heat distortion can push parts out of spec by several thousandths. Or traditional machining, where tool deflection and vibration add variables you have to manage. Waterjet removes those issues.
Most of the time, no. Waterjet produces a smooth edge that’s ready to use. You’re not dealing with slag, burrs, or heat-affected zones that need grinding or sanding. For parts going into assembly or welding, the edge quality is usually good enough as-is.
There are cases where you might see a slight texture on the bottom edge of thicker materials—that’s a function of how the abrasive stream behaves as it exits the material. If your application requires a completely smooth finish on all edges, we can adjust cutting speed or recommend a light deburring pass. But that’s the exception, not the rule.
For custom metal waterjet cutting jobs in Deer Park, NY, this is one of the biggest time-savers. You’re not adding extra steps to clean up the cut. The part comes off the table ready for the next operation.
Laser is fast and works well for thinner materials, but it generates heat. That heat can warp edges, create a heat-affected zone, and limit the types of metals you can cut effectively. Reflective materials like copper and brass are difficult for lasers. Thicker materials slow down significantly or become impractical.
Waterjet cutting metal doesn’t have those limitations. It’s a cold process, so there’s no distortion. It cuts reflective metals just as easily as steel. And it handles thick plate without losing accuracy or speed in the same way a laser would.
The tradeoff is speed on thin materials. Laser can be faster on sheet metal under a quarter inch. But if you’re cutting anything thicker, working with multiple material types, or you need zero heat distortion, waterjet is the better choice. For CNC metal waterjet cutting in Deer Park, NY, we see a lot of jobs that tried laser first and came to us because the parts weren’t holding dimension.
Most jobs turn around in three to five business days. If you’re running a prototype or a small batch, we can often move faster—sometimes same-day or next-day if the schedule allows and the job isn’t overly complex.
Larger production runs or jobs with very thick material take longer, but we’ll give you a realistic timeline up front. We don’t pad estimates or promise dates we can’t hit. If you’re on a tight deadline, let us know when you submit the file. We’ve handled plenty of emergency jobs for manufacturers in Deer Park, NY who needed parts yesterday.
Turnaround also depends on how clean your file is. If we’re spending time fixing geometry issues or clarifying dimensions, that adds time. Send us a clean CAD file with clear specs, and we can move faster.
Yes. We’ve cut single prototypes and multi-hundred-piece production runs. The process scales well because it’s CNC-controlled. Once the program is set, repeatability is built in. You’re getting the same cut on part one and part one hundred.
For prototypes, waterjet is ideal because there’s no tooling cost. You’re not paying for a custom die or fixture. We program the file, cut the part, and you can test fit or function-test it before committing to a larger run.
For production, the advantage is consistency and material efficiency. You’re not dealing with tool wear that degrades quality over time. And because waterjet cutting metal in Deer Park, NY allows tight nesting, you’re minimizing scrap on every sheet. That keeps per-part costs down, even on longer runs.
Local Resources
Useful Links
Other Services we provide in Deer Park
