Hear from Our Customers
You don’t have time for warped steel or edges that need grinding. When you’re working with tight tolerances and expensive materials, the cutting method matters more than most people realize.
Waterjet cutting metal doesn’t create heat. That means no distortion, no hardened edges, no weakened zones around your cuts. The material you send us comes back exactly how you need it—dimensionally accurate, structurally sound, and ready to use.
Whether you’re cutting stainless steel for architectural panels, aluminum for custom fabrication, or thick plate for industrial machinery, you get smooth edges and precision down to ±0.005 inches. No secondary operations. No rework. Just parts that fit the way they’re supposed to.
That’s what happens when the process doesn’t fight the material. You save time, you save money, and your reputation stays intact because the work you deliver actually works.
We’ve been serving manufacturers, fabricators, and contractors across East Meadow and Nassau County for years. We’re not new to this, and we’re not experimenting with your material.
Our shop in West Islip handles everything from one-off prototypes to production runs. We work with local machine shops, metal fabricators, construction contractors, and anyone else who needs precision cuts without the headaches that come from heat-based methods.
East Meadow has a strong manufacturing presence—sheet metal shops, welding operations, precision part makers. We’ve worked with enough of them to know what matters: accuracy, turnaround time, and cuts that don’t create more problems than they solve. That’s what you get here.
You send us your file or sketch. We review it, confirm dimensions, material specs, and any tolerance requirements. If something looks off or could be optimized, we’ll tell you before we start cutting.
Once everything’s confirmed, we program the cut path into our CNC waterjet system. The machine uses high-pressure water mixed with abrasive garnet to cut through your metal—no blades, no torches, no heat. The stream is thinner than most saw kerfs, so you’re not wasting material on wide cuts.
While the machine runs, we monitor for quality. After cutting, we inspect dimensions and edges to make sure everything meets spec. Then your parts are ready for pickup or delivery.
The whole process is straightforward. You’re not waiting weeks, and you’re not getting surprise callbacks about warped material or dimensional issues. It just gets done right.
Ready to get started?
You get cuts in steel, stainless, aluminum, copper, brass, titanium—basically any metal you’re working with. Thicknesses up to 8 inches. Complex shapes, tight inside corners, intricate patterns. All without heat distortion or tool wear issues.
In East Meadow’s manufacturing landscape, that matters. Local fabricators are handling everything from HVAC components to custom architectural metalwork. The projects are diverse, the tolerances are tight, and there’s no room for warped parts or rough edges that need hours of finishing work.
Our CNC metal waterjet cutting gives you burr-free edges that often go straight into assembly. The narrow kerf means you’re getting more parts per sheet, which adds up fast when material costs are high. And because there’s no heat-affected zone, you’re not dealing with hardened edges that kill your drill bits or create weak points in the material.
You also get straight answers. If waterjet isn’t the right method for your job, we’ll tell you. But for most metal cutting applications—especially when precision and material integrity matter—it’s the cleanest solution available.
Waterjet cutting delivers tolerances as tight as ±0.005 inches, which puts it right in line with laser cutting for most applications. The difference is that waterjet doesn’t create a heat-affected zone, so your dimensions stay true even after the cut cools.
Laser and plasma both generate intense heat, which can cause warping in thinner materials and create hardened edges in steel. That heat also limits what you can cut—try running reflective metals like aluminum or copper through a laser and you’ll see why waterjet is often the better choice.
For thick materials, waterjet has a clear advantage. Plasma struggles with anything over an inch, and laser gets expensive and slow. Waterjet handles up to 8 inches without breaking a sweat, and the edge quality stays consistent through the entire thickness.
We cut steel, stainless steel, aluminum, copper, brass, titanium, and tool steel. If it’s metal, waterjet can handle it. There’s no material limitation like you’d find with laser or plasma cutting.
That versatility matters when you’re working on mixed-material projects or prototyping with exotic alloys. You’re not stuck finding a different vendor for each material type, and you’re not dealing with different edge qualities depending on what you’re cutting.
The process works the same whether you’re cutting quarter-inch aluminum sheet or 6-inch steel plate. Same clean edges, same precision, same lack of heat distortion. That consistency makes planning easier and eliminates variables that could mess up your project timeline.
In most cases, no. Waterjet produces smooth, burr-free edges that go straight into the next operation—welding, forming, assembly, whatever you need. You’re not spending labor hours on deburring or edge prep.
Compare that to plasma cutting, which leaves a rough, oxidized edge that almost always needs grinding. Or laser cutting, which can leave a hardened edge and dross buildup that has to be cleaned off. Those secondary operations add time and cost to every single part.
There are situations where you might want a finished edge for aesthetic reasons—architectural work, visible components, that kind of thing. But from a functional standpoint, waterjet edges are ready to use. That’s one of the biggest time-savers in the process, especially on production runs where finishing every edge would kill your margins.
Our system handles metal up to 8 inches thick. That covers the vast majority of industrial, architectural, and manufacturing applications you’ll run into in East Meadow and the surrounding area.
Thicker materials are where waterjet really separates itself from other cutting methods. Laser cutting gets impractical above an inch or so—the cut quality drops off and the speed slows way down. Plasma can push a bit thicker, but you’re dealing with serious edge angularity and heat distortion.
Waterjet maintains consistent edge quality and precision whether you’re cutting 16-gauge sheet or 6-inch plate. The stream doesn’t care about thickness the same way a laser or plasma torch does. You get the same clean cut all the way through, which is critical when you’re working with expensive heavy plate and can’t afford to scrap parts because of taper or poor edge quality.
It depends on material thickness, complexity, and how many parts you need. Simple shapes in thin material can be done in a day. Complex patterns in thick plate take longer. But we’re usually talking days, not weeks.
The actual cutting speed varies—thicker material and harder metals take more time per linear inch. But because there’s no setup for tool changes, no waiting for material to cool, and no secondary finishing in most cases, the overall timeline is often faster than traditional machining.
For East Meadow customers, proximity matters too. We’re close enough that pickup and delivery don’t add days to your schedule. Most local jobs move through quickly because we’re not dealing with long shipping times or complicated logistics. You send us the file, we cut the parts, and you get them back while they’re still relevant to your project timeline.
Waterjet doesn’t create heat, which means no warping, no heat-affected zones, and no material property changes around the cut. For precision work where dimensional accuracy matters, that’s a significant advantage.
Laser cutting works well for thin materials and high-speed production, but it struggles with reflective metals like aluminum and copper. It also creates a heat-affected zone that can harden the edge and weaken the surrounding material. If you’re welding near those cuts or forming the part afterward, that hardened edge can cause cracking.
Waterjet also cuts thicker material more effectively. Once you get past an inch or so, laser cutting slows down dramatically and edge quality suffers. Waterjet maintains the same quality whether you’re cutting 18-gauge or 6-inch plate. For fabricators in East Meadow working with diverse materials and thicknesses, that flexibility eliminates the need to juggle multiple cutting vendors.
Local Resources
Useful Links
Other Services we provide in East Meadow
