Hear from Our Customers
You need glass cut to exact specs. Not close—exact. Whether it’s architectural panels for a commercial build, custom components for industrial equipment, or intricate shapes that traditional methods can’t touch, waterjet cutting gets you there without the usual headaches.
No heat means no warping. No microfractures from thermal stress. No distortion that shows up after the fact and costs you time, material, and credibility with your client.
You get clean edges that need minimal finishing. Cuts that hold tolerances within thousandths of an inch. And the ability to handle curves, interior cutouts, and complex geometries that would be a nightmare—or flat-out impossible—with conventional glass cutting. That’s what cold-process CNC technology does when it’s done right.
We operate out of West Islip, serving Mastic Beach and the broader Long Island area with precision cutting services built on Flow™ Dynamic Waterjet® technology. We’re not new to this. We’ve worked with architects, contractors, manufacturers, and fabricators who need glass cut correctly and delivered on time.
Mastic Beach sits in a region where residential renovations, marine applications, and commercial construction all demand high-quality glass work. You’re not looking for someone who treats your project like a side job. You need a shop that understands tolerances, material behavior, and turnaround expectations.
We handle optical glass, quartz, borosilicate, and fused silica up to 9 inches thick. Our CNC systems position the cutting head within thousandths of an inch, and every piece gets verified before it leaves our facility. You get what you ordered, cut the way you specified.
You send us your specs—drawings, CAD files, or even a sketch if that’s what you’re working from. Our designers convert that into a production-ready plan using advanced CAD software. If there’s an issue with tolerances, material thickness, or cut complexity, we flag it before we start.
Once the design is locked, the glass goes onto a vibration-dampened cutting table. The waterjet system uses a high-pressure stream mixed with fine garnet abrasive to cut through the material. Pressure stays between 40,000 and 60,000 PSI, which is the range that gives you clean cuts without microfractures. The CNC system controls the cutting head with servo motors that adjust in real time, compensating for taper and ensuring dimensional accuracy.
Because there’s no heat, the glass doesn’t warp or develop stress points. The edge comes out smooth—satin finish, no burrs, no discoloration. Most projects need little to no secondary finishing. After cutting, we verify dimensions and flatness against your tolerances, then package everything for delivery or pickup. You get exactly what you need, ready to install or integrate.
Ready to get started?
Waterjet cutting handles glass thicknesses up to 12 inches with full-depth precision. You’re not limited to straight lines or basic shapes. Curves, intricate patterns, interior cutouts—all possible without changing tooling or setup. That flexibility matters when you’re working on custom architectural elements or specialized industrial components.
In Mastic Beach and across Long Island, architectural projects increasingly demand complex glass facades and decorative panels that push beyond standard fabrication methods. Waterjet cutting meets that demand without the limitations of scoring, laser cutting, or mechanical saws. You get linear accuracy within ±0.003″ to ±0.005″, which is tighter than most machining processes.
The cold-process approach also means you can cut tempered or heat-sensitive glass without compromising material integrity. No heat-affected zone. No secondary annealing. The material stays true to its original properties, which is critical for structural applications, ballistic glass, or precision optics. Whether you’re running a single prototype or a production batch, the process scales without sacrificing quality or speed.
We handle optical glass, quartz, borosilicate, fused silica, tempered glass, and laminated glass without issue. The cold-cutting process doesn’t introduce thermal stress, so you can work with heat-sensitive materials that would crack or warp under laser or torch cutting.
Thickness capacity goes up to 12 inches, though most architectural and industrial projects fall between ¼ inch and 2 inches. If you’re working with specialty glass for marine applications, ballistic panels, or precision instruments, waterjet cutting maintains material integrity without altering strength or optical properties.
The key difference is that waterjet doesn’t rely on heat or mechanical scoring. That means no microfractures along the cut line, no edge chipping, and no need for extensive post-processing. You get a clean edge that’s ready for installation or assembly right out of the cutting process.
Traditional glass cutting uses scoring and snapping, which limits you to straight lines and basic geometric shapes. Waterjet cutting uses a high-pressure stream to cut through the material, which means you can create curves, interior cutouts, and intricate patterns without changing tools or setup.
Edge quality is another major difference. Scoring methods often leave rough edges that need grinding and polishing. Waterjet produces a satin-smooth edge with minimal kerf width—around 0.040 inches—that requires little to no finishing. That saves time and labor on every piece.
Speed is also a factor. Waterjet systems cut faster than manual methods, especially on complex shapes or thick material. You’re not waiting for multiple passes or tool changes. The CNC system follows the programmed path in one continuous operation, which reduces production time and keeps projects on schedule.
Yes. CNC glass waterjet cutting in Mastic Beach, NY achieves linear accuracy within ±0.003″ to ±0.005″, which is tighter than most machining processes. That level of precision works for industrial components, mechanical assemblies, and architectural installations where fit and alignment are critical.
We use servo motors to position the cutting head and dynamic taper compensation to adjust for material thickness and pressure variations. That means you get consistent dimensional accuracy across the entire cut, not just at the entry point. Every piece is verified against your specified tolerances before it leaves our shop.
For applications that require flatness standards or specific edge profiles, waterjet cutting delivers without the need for secondary machining. You’re working with a process that’s designed for precision from the start, not one that relies on post-cut correction to meet specs.
Turnaround depends on project complexity, material thickness, and current production schedule. Simple cuts on standard glass thicknesses typically run within a few days. More complex projects—intricate shapes, thick material, or high-volume runs—may take longer, but we’ll give you a realistic timeline upfront.
Location matters here. Operating out of West Islip means we’re close to Mastic Beach and the surrounding Long Island area. That cuts down on shipping delays and makes it easier to coordinate pickups or deliveries around your project schedule. If you’re working on a tight deadline, local proximity helps.
We also handle rush jobs when the schedule allows. If you need something turned around faster than standard lead time, let us know during the quoting process. We’ll tell you what’s possible and what it’ll take to make it happen. No surprises, no vague promises—just clear communication about timing and delivery.
Yes. The process scales from single prototypes to production runs of 100,000 units, depending on part size and complexity. CNC automation means you get the same precision and edge quality whether you’re cutting one piece or one thousand. There’s no loss of accuracy as volume increases.
For small custom projects—residential renovations, one-off architectural elements, or specialty components—waterjet cutting offers flexibility without the tooling costs associated with other methods. You’re not paying for custom dies or setup fees that only make sense at high volume. The system adapts to your design without requiring dedicated equipment.
For larger production runs, the speed and consistency of CNC waterjet cutting keep costs predictable and timelines manageable. Once the design is programmed, the system repeats the cut with the same accuracy every time. That reliability matters when you’re supplying components for ongoing projects or fulfilling contracts with strict quality requirements.
Laser cutting introduces heat, which creates a heat-affected zone around the cut line. That thermal stress can cause microfractures, warping, or changes in material properties—especially with tempered or heat-sensitive glass. Waterjet cutting is a cold process, so the material stays intact without thermal distortion.
Edge quality is another consideration. Laser cutting can leave discoloration or require additional finishing to smooth out heat-affected areas. Waterjet produces a clean, satin-smooth edge right out of the cutting process. You’re not adding extra steps to get a finished product.
Material versatility also favors waterjet. You can cut thick glass, laminated glass, and specialty materials that don’t respond well to laser heat. The process handles a wider range of thicknesses and compositions without requiring different equipment or settings. For projects that demand precision without compromising material integrity, waterjet cutting is the more reliable option.
Local Resources
Useful Links
Other Services we provide in Mastic Beach
