Hear from Our Customers
When your project needs intricate curves, precise holes, or cuts through thick glass without any risk of cracking, waterjet technology delivers. You’re not limited to straight lines or simple shapes—the process handles everything from architectural panels with complex geometries to custom tabletops with artistic inlays.
The difference shows up in the edges. They come off the machine smooth and clean, which means you skip the grinding, polishing, and rework that eats into your timeline. No heat means no thermal stress, no microfractures, and no weakened zones that could fail down the road.
If you’ve dealt with traditional glass cutting methods before, you know the limitations. Certain shapes just aren’t feasible. Thick material becomes a gamble. Waterjet cutting removes those constraints entirely, giving you the freedom to design what you actually need—not what’s easiest to cut.
We’ve been serving North Bellmore, NY and surrounding Nassau County areas since the early 2000s. Our facility is ISO 9001:2015 certified and equipped to handle MIL-Specs, ASTM standards, and other industry requirements that matter when precision isn’t optional.
You’re working with a team that reviews every CAD file before programming begins. That step alone catches errors that would otherwise delay your project or waste material. Our in-house design support means you get real feedback from people who understand both engineering and fabrication—not just one or the other.
Local businesses, contractors, and designers in the North Bellmore area use us because turnaround times stay predictable and the work holds up. When you need custom glass components that fit right the first time, that consistency matters more than anything else.
You start by sending your design file—DXF, DWG, or most CAD formats work. Our design team reviews it to verify dimensions, check for potential issues, and confirm that what you’ve drawn can be cut efficiently. If something looks off, you’ll hear about it before any material gets loaded.
Once the file is approved, it gets programmed into our CNC waterjet system. The machine uses a high-pressure stream mixed with fine abrasive particles to cut through the glass with precision measured in thousandths of an inch. Because there’s no heat involved, the glass doesn’t experience thermal shock or stress—it just gets cut exactly where the program tells it to.
After cutting, the edges come off smooth with a satin finish. Depending on your application, that might be exactly what you need, or you might request additional edge work. Either way, the piece is ready for installation or integration into your larger project without the cracking, chipping, or edge damage that traditional methods often cause.
Ready to get started?
The process handles glass up to 12 inches thick, which covers most architectural, industrial, and residential applications in North Bellmore, NY. You can specify curves, angles, cutouts, and holes that would be difficult or impossible with traditional scoring and breaking methods.
For architectural projects around Nassau County—whether it’s custom facades, interior partitions, or decorative panels—the ability to cut complex shapes without compromising structural integrity makes a real difference. The same applies to industrial components where tolerances matter and failure isn’t an option.
Residential glass cutting services benefit from the same precision. Custom countertops, tabletops, shelving, and decorative elements all come out with clean edges and exact dimensions. When you’re working with designers or homeowners in North Bellmore who want something specific, waterjet cutting gives you the flexibility to say yes instead of compromising on the design.
Material waste stays minimal because the cutting stream is narrow. That efficiency translates to cost savings on your end, especially when you’re working with expensive glass types or need to maximize yield from each sheet.
Waterjet cutting works best on annealed glass—the standard glass that hasn’t been heat-treated. Tempered glass can’t be cut after the tempering process because any cutting will cause it to shatter immediately. That’s just the nature of how tempering works, not a limitation of the waterjet itself.
If your project requires tempered glass, the cutting needs to happen before tempering. You’d send the design, we cut the glass to exact specifications using the waterjet, and then those pieces get sent out for tempering. The same principle applies to most laminated glass—cutting through the layers can compromise the bond or cause delamination.
For projects in North Bellmore, NY that need both custom shapes and tempered glass, the workflow just requires an extra step. The precision of waterjet cutting actually makes this easier because the pieces come out accurate enough that tempering won’t cause fit issues later. You’re just planning the sequence differently than you would with annealed glass that’s ready to install right off the machine.
Laser cutting uses focused heat to melt or vaporize material, which creates problems when you’re working with glass. The heat generates thermal stress that often leads to microfractures, edge chipping, or outright cracking—especially with thicker glass or complex cuts. You also end up with heat-affected zones that can weaken the material over time.
Waterjet cutting uses high-pressure water mixed with abrasive particles, so there’s zero heat involved. The glass stays at room temperature throughout the entire process, which eliminates thermal stress completely. That’s why you can cut intricate patterns, tight curves, and thick material without worrying about cracks or structural compromise.
The edge quality differs too. Laser cutting often requires secondary grinding and polishing to smooth out rough or damaged edges. Waterjet cutting produces a clean, satin finish right off the machine that’s often ready to use as-is. For custom glass waterjet cutting in North Bellmore, NY, that difference saves time and reduces the risk of ruining expensive material during finishing work.
Most projects take between 7 and 10 business days from file approval to finished pieces, though that timeline shifts based on material availability, design complexity, and current shop capacity. Simple cuts on standard glass types move faster than intricate patterns on specialty materials.
The file review process happens upfront, usually within a day or two of submission. That’s when potential issues get caught—dimension errors, toolpath problems, or design elements that would cause unnecessary complications. Getting that feedback early prevents delays later, which is why the review step matters even though it adds a day to the front end.
For projects around North Bellmore, NY with tight deadlines, communication makes the difference. If you need something faster, calling ahead to discuss the timeline before submitting files helps set realistic expectations. Rush jobs are sometimes possible depending on what else is in the queue, but planning for the standard 7-10 day window keeps your project on track without last-minute stress.
Waterjet cutting leaves a smooth, satin finish that’s not sharp like a freshly scored edge from traditional glass cutting. The abrasive stream creates a consistent surface texture that’s safe to handle and often ready for installation without additional work. You won’t get the polished, crystal-clear edge that comes from flame polishing or mechanical polishing, but you also won’t get the sharp, dangerous edges that require immediate attention.
Whether you need additional finishing depends entirely on your application. For architectural glass waterjet cutting in North Bellmore, NY where the edges will be framed or set into channels, the satin finish works perfectly. For decorative pieces or tabletops where the edge is visible and part of the design, you might want polishing or beveling added afterward.
The key advantage is that you’re starting from a much better place than traditional cutting methods. There’s no chipping to repair, no microfractures to worry about, and no heat damage that weakens the edge. If you do want polishing, it goes faster and removes less material because the edge is already smooth and uniform.
DXF and DWG files work best because they contain the vector paths that CNC equipment reads directly. Most CAD software exports to these formats without any issues. If you’re working in AutoCAD, SolidWorks, or similar programs, you’re already set up to provide exactly what’s needed.
PDF files can work if they’re created properly—meaning they contain actual vector data, not just an image of your drawing. A scanned sketch or a photo of a drawing won’t translate into toolpaths. The file needs to have clean, closed paths that define exactly where the cutting should happen.
If you’re not sure whether your file will work, our design team reviews everything before programming begins. We’ll catch problems like overlapping lines, gaps in paths, or dimension inconsistencies that would cause issues during cutting. For residential glass cutting services in North Bellmore, NY, that review process means you’re not guessing whether your file is right—you’ll know before any material gets touched.
Yes, and that’s one of the situations where waterjet cutting outperforms traditional methods significantly. Drilling holes in glass with standard bits creates stress points that can lead to cracking, especially if the hole is close to an edge or if you need multiple holes in a tight pattern. Waterjet cutting makes those holes as part of the same process that cuts the outer shape, with no additional stress on the material.
You can specify exact hole sizes, positions, and even non-circular cutouts for specialized hardware. The precision stays consistent across the entire piece, so if you need mounting holes that align perfectly with existing fixtures, the tolerances are tight enough to make that happen. There’s no wandering, no chipping around the hole edges, and no risk of the glass cracking during installation when you tighten the hardware.
For industrial glass waterjet cutting in North Bellmore, NY where components need to integrate with machinery or mounting systems, that reliability matters. You’re not dealing with oversized holes that require shims or undersized holes that need to be redrilled. The holes come out right, the glass stays intact, and your installation goes smoothly.
Local Resources
Useful Links
Other Services we provide in North Bellmore
