Hear from Our Customers
You’re working with expensive material. One bad cut and you’re looking at delays, rework, and money down the drain.
Waterjet cutting eliminates that risk. The process uses high-pressure water and abrasive to slice through marble with tolerances down to 0.001 inches. No blades means no chipping. No heat means no cracking or discoloration. You get smooth, burr-free edges that are ready for installation without secondary finishing.
This matters when you’re cutting intricate patterns for backsplashes, custom inlays, or countertop cutouts. Traditional saws can’t handle tight curves or delicate details without breaking the stone. Waterjet can. You’ll see clean inside corners, precise edge profiles, and complex shapes that would be impossible with circular saws or routers.
The result is less material waste, faster turnaround, and installations that look exactly how you drew them up. No surprises. No compromises.
We work with architects, designers, and contractors across Long Island who need precision cuts on high-end materials. We’re based in West Islip and serve Riverhead’s growing luxury residential and commercial market.
Riverhead has seen significant development in recent years. From estate homes near Baiting Hollow Golf Course to commercial properties along the North Fork, the demand for custom stonework is real. You need a fabricator who understands tight tolerances and fast timelines.
We handle everything from single custom pieces to production runs. Our CNC waterjet equipment gives you repeatable accuracy across multiple slabs, which matters when you’re matching patterns or producing identical components for a large installation.
You send us your design files or templates. We review dimensions, material specs, and any special requirements like edge profiles or cutouts. If something won’t work, we’ll tell you before we start cutting.
Once we confirm the details, we program the CNC waterjet system with your exact specifications. The machine follows those coordinates with precision, cutting through marble up to several inches thick without applying mechanical stress to the material. The waterjet stream is thin—usually less than 0.04 inches—which means we can nest parts closely together and minimize waste from your slab.
After cutting, we inspect each piece to ensure it meets tolerance. Most parts come off the machine ready to install. If you need additional edge work or finishing, we coordinate that too. Then we package everything securely for transport or delivery to your Riverhead job site.
The whole process is straightforward. You get what you ordered, cut correctly the first time.
Ready to get started?
You’re not just getting a cut piece of stone. You’re getting design consultation upfront to make sure your specs will work with the material. We’ll catch issues with wall thickness, inside radius limitations, or structural concerns before they become expensive problems.
The cutting itself is done on CNC-controlled equipment, which means repeatability and accuracy across your entire order. Whether you need one custom medallion or fifty identical countertop blanks, each piece matches the CAD file. We handle materials up to several inches thick, and we can cut virtually any shape your design requires.
For Riverhead projects, this matters. The area’s luxury home market demands high-end finishes. Developers near the North Fork expect flawless stonework in kitchens, bathrooms, and entryways. Commercial properties need durable, precisely fabricated components that install without modification. Waterjet cutting delivers that consistency.
You also get minimal material waste. The thin kerf and efficient nesting mean more usable pieces from each slab, which impacts your material costs. And because there’s no heat-affected zone, you don’t lose material to discoloration or microfractures along the cut edge.
Yes. Waterjet cuts through thick marble without applying mechanical force or heat to the material. Traditional sawing creates vibration and friction, which can propagate existing microfractures in the stone and cause it to crack during cutting.
Waterjet uses a focused stream of high-pressure water mixed with abrasive garnet. The stream erodes material away rather than forcing a blade through it. This means zero mechanical stress on the surrounding stone. You don’t get the internal fractures or edge chipping that come from blade-based methods.
We regularly cut marble slabs several inches thick for countertops, wall panels, and architectural elements. The process works the same whether you’re cutting half-inch tile or three-inch slabs. Thickness just affects cutting speed, not quality or risk of damage.
Waterjet cutting achieves tolerances down to ±0.001 inches, which is tight enough for virtually any architectural or decorative application. The CNC system follows your CAD file exactly, so if you can draw it, we can cut it.
This precision matters most when you’re doing inlays, medallions, or patterns that require multiple pieces to fit together seamlessly. Traditional methods struggle with tight inside corners and delicate features because the cutting tool has physical width and can’t navigate sharp angles without breaking material. Waterjet streams are less than 0.04 inches wide, so we can cut sharp internal corners, narrow slots, and complex curves without compromising the stone.
For projects in Riverhead’s luxury homes, this means you can specify custom designs that actually get executed as drawn. Backsplash patterns, floor medallions, fireplace surrounds—anything that requires detailed cuts comes out clean and accurate.
No. Waterjet produces smooth, burr-free edges that are typically ready for installation without secondary processing. The quality of the edge depends on cutting speed—slower passes create smoother finishes—but even standard production speeds deliver edges that are far cleaner than saw cuts.
When you cut marble with a circular saw or wire saw, you get striations, chipping, and rough texture along the cut edge. Those edges need grinding, polishing, or honing before they’re acceptable for visible installations. That’s extra time and labor.
Waterjet edges come off the machine smooth enough for most applications. If you need a polished edge for aesthetic reasons, that’s a quick process because the edge is already uniform and clean. But for edges that will be hidden—like countertop seams or pieces that butt against walls—waterjet edges are fine as-is. This saves you finishing time and keeps your project moving.
Turnaround depends on complexity and queue, but most custom marble cutting projects are completed within a few days to a week. Simple cuts with straightforward geometry move faster. Intricate multi-piece designs or large production runs take longer.
The advantage of CNC waterjet is that once we program your design, the actual cutting is relatively fast and doesn’t require constant operator intervention. We can run jobs efficiently without sacrificing accuracy. For contractors working on Riverhead projects with tight schedules, this matters. You’re not waiting weeks for custom stonework.
We’ll give you a realistic timeline upfront based on your specific project. If you’re under a hard deadline, let us know when you submit your design files. We can often prioritize rush jobs or adjust scheduling to meet critical installation dates.
Yes. Waterjet cuts virtually any material, so if your project involves marble combined with granite, quartz, or other stone, we handle it all with the same equipment. This is useful for projects that mix materials—like a marble backsplash with granite countertops, or decorative inlays that combine different stone types.
The process parameters adjust based on material hardness and thickness, but the CNC system manages that automatically. You don’t need to source different fabricators for different materials. Everything gets cut to the same tolerances using the same reference files, which ensures that mixed-material installations fit together correctly.
For commercial projects in Riverhead that specify multiple stone types for aesthetic contrast, this simplifies coordination. One fabricator, one set of drawings, consistent quality across all materials.
Waterjet cutting minimizes waste through narrow kerf width and efficient nesting. The cutting stream is typically 0.03 to 0.04 inches wide, compared to saw blades that remove 0.125 inches or more of material with each cut. That difference adds up fast when you’re cutting multiple pieces from expensive marble slabs.
Narrow kerf means you can nest parts closer together on the slab. Instead of leaving wide gaps between pieces to accommodate blade width and vibration, you’re only leaving minimal spacing for the waterjet stream. This lets you fit more usable pieces onto each slab, which directly reduces your material cost.
Additionally, waterjet doesn’t create the edge damage that saws do. With traditional cutting, you often lose additional material along the cut line due to chipping or microfractures that require grinding away. Waterjet edges are clean from the start, so the dimensions you cut are the dimensions you keep. For high-end marble installations in Riverhead’s luxury market, reducing waste means better project economics without compromising quality.
Local Resources
Useful Links
Other Services we provide in Riverhead
