Hear from Our Customers
You’re working with expensive marble. The last thing you need is cracking from blade pressure, heat discoloration ruining natural veins, or a fabricator telling you your design is “too complex.”
Waterjet cutting doesn’t apply heat. It doesn’t force the stone. It uses high-pressure water mixed with fine abrasive to cut through marble cleanly, regardless of thickness or intricacy.
That means you get smooth edges on medallions, inlays, countertop cutouts, and architectural features without the chipping or micro-fractures that show up later. No secondary finishing. No explaining to your client why the corners don’t match the rendering.
If you can draw it, we can cut it. Curves, angles, tight radiuses, whatever the design calls for. The material stays intact, the edges stay clean, and you stay on schedule.
We operate right here in Syosset, NY, serving architects, designers, contractors, and fabricators across Nassau County and the broader tri-state area. We’re not a general machine shop that happens to have a waterjet. We specialize in stone.
That focus matters when you’re dealing with marble that costs hundreds per square foot. You need someone who understands how different marble types respond to cutting, who knows when to adjust pressure and speed, and who won’t learn on your material.
Syosset sits in a market where high-end residential and commercial projects demand precision. We’ve built our reputation here by delivering exactly that—on time, to spec, without the back-and-forth that eats into your timeline.
You send us your design file—DXF, DWG, or even a detailed sketch if that’s what you’re working from. We review it for any potential issues with toolpathing or material limitations, then confirm specs and timeline with you before we start.
Once approved, your marble goes onto our CNC-controlled waterjet table. The cutting head follows your design with precision measured in thousandths of an inch. Water pressure does the work, so there’s no vibration, no heat buildup, no dust cloud.
Depending on complexity and thickness, most cuts are single-pass. That means the edge comes off the table finished, not rough-cut for someone else to grind down later. You get the piece, inspect it against your specs, and move forward with installation.
If your project involves multiple pieces or phased delivery, we coordinate that. If you need us to work from template or field measurements, we handle it. The goal is to remove variables, not add them.
Ready to get started?
Precision marble waterjet cutting in Syosset, NY means you’re working with technology that handles marble up to 12 inches thick without changing your design. Countertops, wall cladding, flooring medallions, fireplace surrounds, custom furniture inlays—whatever the application, the process stays consistent.
You get clean cuts on sink and faucet holes without the spiderweb cracks that happen when installers drill on-site. You get mitered edges that fit together without gaps. You get intricate border patterns that would take days by hand, done in hours.
Nassau County’s design market leans toward custom, high-end work. That’s where waterjet makes the most sense. When a client is paying for book-matched slabs or rare marble varieties, you can’t afford to lose material to bad cuts. Our process maximizes yield, which means you’re not eating cost on wasted stone.
We also cut other natural stones—granite, limestone, travertine, slate—but marble is where waterjet really separates itself from traditional methods. The lack of heat and mechanical pressure keeps the stone’s integrity intact, which matters when you’re dealing with softer or more veined varieties.
Yes. Waterjet applies focused water pressure, not mechanical force, so there’s no risk of cracking from blade tension or vibration. That’s the main advantage over diamond saws or routers when you’re cutting tight curves, sharp internal corners, or detailed inlay patterns.
Traditional methods put stress on the material. Even with a skilled operator, you’re limited by how much pressure the stone can take before it fractures. Waterjet removes that variable entirely.
We’ve cut everything from circular medallions with sub-millimeter detail to 45-degree miters for waterfall countertop edges. The stone doesn’t know it’s being cut until it’s already separated. If your design file is accurate, the finished piece will match it.
No. The process is cold, so there’s no heat discoloration or micro-cracking along the cut line. The edge comes off smooth and clean, without the burn marks you sometimes see from blade cutting or the chipping that happens with routers.
Most waterjet cuts require little to no hand finishing. Depending on your application, the edge might go straight to installation. If you do need a polished edge for aesthetic reasons, you’re starting from a clean surface, not trying to fix damage.
This matters most on marble with pronounced veining or lighter colors, where any heat exposure or rough handling shows up immediately. Waterjet keeps the stone looking like it did before the cut—just in a different shape.
We handle marble up to 12 inches thick as a standard capability, with options for thicker material depending on the project. Thickness doesn’t change the quality of the cut, just the time it takes.
Thicker slabs are common in architectural applications—column cladding, structural elements, heavy-duty countertops. Waterjet handles them the same way it handles thinner material: consistent pressure, clean edges, no heat.
If you’re working with something outside the normal range, we’ll tell you upfront whether it’s feasible and what the lead time looks like. Thickness usually isn’t the limiting factor—design complexity and material availability are.
DXF and DWG files work best because they translate directly into our CNC system without conversion issues. If you’re working in CAD or design software, exporting to one of those formats is usually straightforward.
If you don’t have a digital file, we can work from dimensioned drawings, templates, or field measurements. It adds a step, but it’s not a problem. We’ll recreate the design digitally, send it back for approval, then proceed once you confirm.
The cleaner your file, the faster we move. If there are overlapping lines, unclosed shapes, or scaling issues, we’ll catch them during review and reach out before cutting. Better to spend five minutes fixing a file than remaking a piece.
Traditional methods—diamond blades, saws, routers—all generate heat and apply mechanical pressure. That limits how intricate you can get before risking damage, and it creates dust, noise, and safety concerns.
Waterjet removes those limitations. No heat means no discoloration or thermal cracking. No mechanical pressure means no fracture risk on delicate cuts. No dust means cleaner work environment and no respiratory concerns.
The tradeoff is cost and access. Waterjet equipment isn’t something most small shops have, so you’re outsourcing either way. But if your project involves custom work, complex geometry, or high-value material, waterjet is the safer bet. You’re paying for precision and risk reduction, not just cutting.
It depends on design complexity, material thickness, and how many pieces you need. A simple countertop with sink cutouts might take a few hours. An intricate floor medallion with multiple inlays could take a full day or more.
We’ll give you a timeline estimate once we review your design file and confirm material specs. Most projects in Syosset turn around within a week, assuming material is on-site and the design is finalized.
Rush jobs are possible if your schedule demands it, but that depends on our current queue. The earlier you reach out, the more flexibility we have. If you’re coordinating with installers or working toward a project deadline, let us know upfront so we can plan accordingly.
Local Resources
Useful Links
Other Services we provide in Syosset
