Hear from Our Customers
Your parts come out within ±0.001″ tolerance. The edges are clean enough that secondary finishing becomes optional, not mandatory. That alone saves you time and labor costs.
There’s no heat-affected zone, so your material properties stay intact. No warping. No hardening. No slag to grind off later. If you’re working with titanium, glass, composites, or thick steel, that matters more than you’d think.
You also get faster turnaround on both prototypes and production runs. Programming is quick. Setup is straightforward. And because the kerf is only about 0.030″ to 0.040″, you’re not wasting material on every cut. When you’re working with expensive stock, that adds up fast.
We’ve been serving manufacturers, architects, designers, and contractors across Long Island for years. We’re not the cheapest option in Lindenhurst, NY—and that’s intentional. You’re paying for equipment that holds tolerance, operators who know how to program complex geometries, and a process that doesn’t compromise your material.
Long Island has over 3,000 small and medium manufacturers. Most of them deal with the same headaches: aging equipment, tight deadlines, and specs that don’t leave room for error. We built our precision waterjet cutting shop in Lindenhurst, NY to handle exactly that kind of pressure.
You send us your file—DXF, DWG, or whatever format your designer uses. We review it for manufacturability and flag anything that might cause issues before we start cutting. If your tolerances are tighter than ±0.003″, we’ll talk through whether your material and thickness can realistically hold it.
Once the file is dialed in, we program the CNC system and load your material. The cutting head moves along your programmed path while a high-pressure stream of water mixed with abrasive garnet does the actual cutting. Pressure runs between 50,000 and 60,000 PSI. The stream is about as thick as a human hair.
Because it’s a cold process, there’s no thermal distortion. The material doesn’t harden or warp. You get a part that matches your CAD file without secondary operations eating into your schedule. If you need beveled edges or complex interior cutouts, precision CNC waterjet cutting in Lindenhurst, NY handles that in the same pass.
Ready to get started?
You get material consultation before the job starts. If you’re not sure whether 6061 aluminum or 304 stainless is the right call for your application, we’ll walk through the trade-offs. We also review your tolerances against material thickness—because a ±0.001″ tolerance on 0.125″ plate is very different from the same spec on 4″ stock.
Our precision waterjet cutting for tight tolerances in Lindenhurst, NY covers metals, plastics, composites, stone, glass, and foam. Thickness ranges from 1/16″ up to 10″ depending on material. If you’re in aerospace, automotive, medical device manufacturing, or architectural fabrication, you’re working with materials we cut every week.
Lindenhurst sits in a manufacturing hub that’s seen steady growth despite the challenges most shops face with labor and equipment costs. The demand for precision water jet cutting services in Lindenhurst, NY has grown alongside that—because more local manufacturers need tolerances their legacy equipment can’t hold anymore. We’re set up to handle that gap, whether it’s a one-off prototype or a production run of 500 parts.
Standard tolerance for precision waterjet cutting in Lindenhurst, NY is ±0.003″ to ±0.005″. That’s what most jobs will hit without special setup or secondary operations.
If your application requires tighter specs, we can get down to ±0.001″ under the right conditions. Material type, thickness, and edge quality all factor in. Thinner materials hold tighter tolerances more easily than thick plate. And if you’re cutting something over 2″ thick, expect tolerances closer to ±0.010″ unless we slow the cut speed way down.
The key difference between waterjet and other cutting methods is consistency. There’s no heat distortion throwing your dimensions off after the cut cools. What you program is what you get—assuming your material is flat and your file is clean.
Yes, most likely. Precision water jet cutting services in Lindenhurst, NY work on metals like aluminum, stainless steel, titanium, tool steel, and copper alloys. We also cut composites, carbon fiber, fiberglass, plastics like acrylic and polycarbonate, stone, glass, rubber, and foam.
The process doesn’t generate heat, so there’s no risk of melting, warping, or changing the material’s properties. That makes waterjet the go-to method for heat-sensitive materials or anything that would harden under thermal cutting. If you’re working with something exotic or you’re not sure how it’ll respond, bring us a sample and we’ll run a test cut.
Thickness matters more than material type. We can cut up to 10″ on some materials, but anything over 6″ will take longer and may require adjustments to hit your tolerance spec. The thicker the material, the wider the kerf and the slower the feed rate.
Programming and setup for precision CNC waterjet cutting in Lindenhurst, NY is fast—usually same day if your file is clean. Actual cut time depends on material, thickness, part complexity, and how many pieces you need.
A simple bracket in 0.25″ aluminum might take 10 minutes. A complex part with interior cutouts and tight corners in 1″ stainless could take an hour or more. If you’re running 100 parts, we can nest them efficiently to maximize material usage and minimize total machine time.
Most jobs turn around in 3 to 5 business days from file approval to finished parts. If you’re under a deadline, let us know up front. We can often prioritize rush work, but that depends on what’s already in the queue. The advantage of waterjet over laser or plasma is that we don’t need custom tooling or lengthy setup—so short runs and prototypes move faster than they would with traditional machining.
Waterjet doesn’t create a heat-affected zone. Laser and plasma both generate intense heat, which can warp thin materials, harden edges, and change the metallurgical properties of your part. If you’re cutting something that needs to maintain its temper or structural integrity, waterjet is the safer choice.
Waterjet also cuts thicker materials more effectively. Laser struggles past 1″ on most metals. Plasma can go thicker, but edge quality suffers and you’ll need secondary finishing. Precision waterjet cutting for tight tolerances in Lindenhurst, NY handles 4″ to 6″ plate with clean edges and no dross.
Material versatility is another factor. Waterjet cuts reflective materials like copper and brass without issue. It handles composites, glass, and stone—none of which respond well to thermal cutting. If you’re working across multiple material types and you don’t want to juggle multiple vendors, waterjet covers more ground in one process.
Most parts come off the machine ready to use. The edge quality from high precision waterjet cutting in Lindenhurst, NY is smooth enough for most applications without additional finishing. You won’t see slag, burrs, or heat discoloration.
If your application requires a specific surface finish—like a polished edge for aesthetic reasons or a deburred edge for safety—you might need light finishing. But that’s a quick pass with a file or sander, not a full secondary operation. Compare that to plasma or oxy-fuel cutting, where you’re grinding off slag and smoothing rough edges on every part.
For parts that need to be welded, painted, or powder-coated, waterjet edges are clean and ready for prep. There’s no oxidation or hardened layer to remove first. That saves time in your downstream processes and reduces the risk of coating failure or weak welds. If you’re assembling parts where fit and alignment matter, the dimensional accuracy of waterjet means less shimming and adjusting during assembly.
Send us your CAD file in DXF or DWG format. Include material type, thickness, and quantity. If you have tolerance requirements tighter than ±0.005″, call those out specifically so we can factor in any extra setup or slower cutting speeds.
Let us know your timeline. If this is a prototype that needs to happen fast, we’ll prioritize it differently than a production run with a flexible delivery date. And if you’re not sure about material selection, we can consult on that before quoting—sometimes switching from one alloy to another saves money without compromising performance.
The more detail you provide up front, the faster we can turn around a quote. If your file has features that are difficult to cut or tolerances that are unrealistic for the material and thickness, we’ll flag that in the quote so there are no surprises later. Our precision waterjet cutting shop in Lindenhurst, NY is set up to handle complex jobs, but we’d rather have the conversation about feasibility before you commit to a design that’s going to cost more or take longer than it needs to.
Local Resources
Useful Links
Other Services we provide in Lindenhurst
