Hear from Our Customers
You get parts that don’t need fixing. When you’re working with tight tolerances—sometimes down to ±0.001″—there’s no room for heat-affected zones, warped edges, or secondary grinding. That’s where precision waterjet cutting makes sense.
The process is cold. There’s no torch, no plasma, no laser heat warping your material. Water and abrasive do the work, which means your stainless steel, aluminum, titanium, or composite keeps its structural integrity from start to finish.
You also skip the cleanup. Most cuts come off the table with burr-free edges that are ready to use. No deburring. No secondary machining. That’s time you’re not paying someone to fix what shouldn’t have been broken in the first place.
And if you’re cutting something thick—say, 6 inches of steel or 10 inches of aluminum—you’re not switching tools or processes. Same machine. Same setup. Different feed rate.
We’ve been serving manufacturers across Long Island and the tri-state area since the early 2000s. We’re not new to this, and we’re not learning on your dime.
Our shop in West Babylon runs high-performance CNC waterjet equipment built for precision work. We’ve cut parts for aerospace companies, marine fabricators, architectural firms, and machine shops that can’t afford to get it wrong. If you’ve seen custom metalwork in a high-end retail space or a one-off bracket in a performance build, there’s a chance it came through here.
We’re local, which matters when you need fast turnaround or want to talk through a design before committing to a full run. You’re not dealing with a call center or a regional hub. You’re working with people who understand what West Babylon-area manufacturers actually need.
You send us a drawing or a CAD file. If you don’t have one, we can work from a sketch or sample part. Our team reviews it, confirms material type and thickness, and programs the CNC waterjet to match your specs.
The cutting happens on a multi-axis table. A high-pressure stream of water mixed with garnet abrasive cuts through your material—metal, stone, composites, whatever you’re using. The stream is narrow, usually around 0.03 inches, so there’s minimal kerf and almost no material waste.
Because there’s no heat, there’s no distortion. The edges come out clean. If you’re cutting something like a gasket or a bracket with bolt holes, those holes are ready to tap. No burning. No slag. No grinding.
Once the cut is done, we inspect it against your tolerances. If it’s a repeat order, we store the program so the next run is identical. That’s how you get consistency across 10 parts or 1,000.
Ready to get started?
You’re getting precision water jet cutting services that handle materials from 1/16 inch up to 10+ inches thick. That range covers most of what Long Island manufacturers are working with—whether it’s thin gauge stainless for architectural inlays or thick plate steel for structural components.
We cut metals like aluminum, stainless steel, titanium, tool steel, and brass. We also handle non-metals: composites, stone, granite, marble, rubber, and plastics. If you’re not sure whether your material works, ask. We’ve probably cut it before.
For West Babylon-area shops dealing with marine or coastal projects, waterjet cutting is especially useful. There’s no heat to compromise corrosion resistance in stainless or aluminum, and the edges don’t need additional sealing or finishing. That matters when parts are going on a boat or into a high-humidity environment.
You also get design support. If your part has a feature that’s hard to machine or requires multiple setups on a mill, we can often simplify it with a single waterjet pass. Complex geometries, tight inside corners, intricate patterns—all doable without custom tooling.
We regularly hold tolerances of ±0.005″ on most jobs. For high-precision applications—aerospace parts, tooling, or anything that requires tighter specs—we can hit ±0.001″ depending on material type and thickness.
Thicker materials and harder alloys will have slightly wider tolerances due to stream deflection, but we account for that in programming. If you need a specific tolerance, tell us up front. We’ll let you know if waterjet is the right process or if you’d be better off with a secondary operation.
Most customers find that our standard tolerances beat what they were getting from plasma or laser, especially on thicker cuts where heat becomes a problem.
Yes, unless you’re cutting tempered glass or diamonds. Waterjet cuts virtually everything else: all metals, all plastics, stone, composites, rubber, foam, ceramics, and more.
We’ve cut titanium for aerospace parts, granite for architectural projects, and Kevlar composites for specialty applications. The process doesn’t care about hardness or thermal sensitivity. It’s abrasive and water doing the work, not heat or a blade.
If you’re switching between materials—say, aluminum one day and stainless the next—we don’t need to change tooling. We adjust pressure and feed rate in the program. That flexibility is why a lot of machine shops and fabricators in West Babylon use us for their overflow work.
There’s no heat. The water stream stays cold throughout the entire cut, so there’s no temperature rise in the material. That’s the difference between waterjet and every thermal cutting process—plasma, laser, oxy-fuel, even EDM.
When you cut with heat, you create a heat-affected zone. That zone changes the material properties: hardness, grain structure, sometimes dimensional accuracy. On precision parts, that’s a dealbreaker. You end up with warped edges, internal stresses, or parts that don’t fit.
Waterjet eliminates that. The abrasive does the cutting mechanically, not thermally. Your part comes off the table the same temperature it went on. No warping. No brittleness. No need to stress-relieve or anneal afterward.
Usually not. Most waterjet cuts produce a burr-free edge that’s ready to use. The finish quality depends on how we program the cut—faster cuts give you a slightly rougher edge, slower cuts give you a smoother finish.
For parts that need to be tapped, welded, or assembled right away, the edges are clean enough to work with immediately. You’re not grinding, deburring, or sanding unless you have a specific cosmetic requirement.
If you do need a mirror finish or a specific surface roughness, we can adjust the cutting speed or recommend a quick secondary pass. But for the majority of jobs—brackets, plates, gaskets, structural components—what comes off the waterjet is what you use.
It depends on the complexity of the part and our current queue, but most jobs ship within a few days. Simple cuts with standard materials can often be done same-day or next-day if you’re in a bind.
For larger production runs or more complex geometries, we’ll give you a realistic timeline up front. We don’t overpromise and underdeliver. If it’s going to take a week, we’ll tell you it’s going to take a week.
Being local to West Babylon helps. You can drop off material, pick up parts, or stop by to check on a job without dealing with freight delays or long-distance coordination. That’s an advantage when you’re on a tight schedule.
Absolutely. That’s one of the biggest advantages of CNC waterjet cutting. We can nest multiple parts on a single sheet to maximize material usage and minimize scrap.
The kerf width on a waterjet is narrow—about 0.03 inches—so parts can be placed close together without sacrificing quality. If you’re cutting 50 brackets or 100 gaskets, we’ll arrange them to get the most parts per sheet.
That saves you money on material costs, especially if you’re working with expensive alloys like titanium or specialty stainless. We’ll show you the nesting layout before we cut so you know exactly how much material you’re using.
Local Resources
Useful Links
Other Services we provide in West Babylon
