Hear from Our Customers
You’re working with expensive marble. One bad cut and you’re eating the cost, pushing back timelines, and explaining to your client why the pattern doesn’t line up.
Waterjet cutting removes that risk. No heat means no thermal cracks. No blade contact means no chipping along edges. You get cuts accurate to within 0.1 to 0.2 millimeters, which means your inlays fit, your patterns align, and your edges need minimal finishing work.
Whether you’re fabricating custom countertops, architectural panels, or decorative inlays for high-end residential projects in North New Hyde Park, NY, the process handles complexity without compromise. Curves, corners, logos, geometric patterns—waterjet handles it all in a single pass. You send the file, we cut it clean, and you move forward without the usual headaches.
We’ve been handling custom marble waterjet cutting in North New Hyde Park, NY for contractors, architects, and fabricators who need it done right the first time. We’ve worked with everyone from high-end retail brands to local construction teams managing tight residential timelines.
Our shop runs CNC waterjet systems that turn your CAD files into finished pieces without the guesswork. Before we cut anything, our in-house team reviews your file to catch tolerance issues, nesting problems, or design conflicts that could cost you time or material.
North New Hyde Park has a strong mix of renovation work and new construction, which means deadlines matter and material costs add up fast. We get that. You’re not looking for someone to hold your hand—you’re looking for clean cuts, fast turnaround, and no surprises when the piece shows up.
You send us your design file—DXF, DWG, or PDF works. If you don’t have a file yet, we can work from sketches or measurements and build it for you. Our team reviews it to make sure everything’s set up for clean cutting: proper kerf allowance, no overlapping paths, correct nesting to minimize waste.
Once the file’s approved, we load your marble onto the CNC waterjet table and secure it. The cutting head uses a high-pressure stream of water mixed with fine abrasive garnet to slice through the stone. There’s no heat, no vibration, and no mechanical force that could crack or chip the material. The stream follows your design with precision that beats traditional saws or routers by a wide margin.
After cutting, edges come off the table smooth. Depending on your specs, you might need light finishing, but in most cases, the part is ready to install. No secondary grinding. No filling chips. You get what you ordered, cut the way you drew it.
Ready to get started?
Every custom marble waterjet cutting project in North New Hyde Park, NY includes file review, material handling, precision cutting, and quality checks before it leaves our shop. We cut marble up to 12 inches thick, and we can go thicker if your project requires it by adjusting pressure and speed.
You’re not limited to straight lines or simple shapes. Waterjet handles tight inside corners, smooth radius curves, and intricate patterns that would be impossible or prohibitively expensive with blade-based methods. That means you can design freely without wondering if the fabricator can actually execute it.
Material waste stays low because the cutting stream is narrow—typically under 1/16 inch. That’s a big deal when you’re working with imported marble or book-matched slabs where every square inch counts. Less waste means lower material costs and better yield per slab, which adds up fast on larger projects across Long Island’s competitive construction market.
We also keep turnaround tight. Most jobs are cut within a few days of file approval, and we coordinate delivery or pickup based on your schedule. You’re not waiting weeks or dealing with excuses.
No. Waterjet cutting is a cold process, which means there’s no heat buildup that could cause thermal stress or cracking. Traditional saws generate friction and heat, which can lead to microfractures or visible cracks, especially in natural stone with existing veining or inclusions.
The waterjet stream cuts through marble using high-pressure water and abrasive garnet, not mechanical force. There’s no blade pushing against the stone, no vibration, and no impact. This makes it ideal for delicate or expensive slabs where you can’t afford to risk damage.
If your marble has natural fissures or weak points, we’ll review the slab before cutting and adjust the path or pressure to work around those areas. The process is controlled and precise, so you get clean cuts without compromising the integrity of the material.
Waterjet cutting delivers accuracy within 0.1 to 0.2 millimeters, which translates to about ±0.005 inches. That level of precision is more than enough for inlays, mosaics, architectural panels, and any application where parts need to fit together without gaps or forced alignment.
CNC marble cutting systems follow your digital file exactly, so if your design is drawn correctly, the cut will match. That’s why we review every file before cutting—to catch any dimensional issues or tolerance conflicts that could affect fit or finish.
For projects in North New Hyde Park, NY that involve complex patterns or multi-piece assemblies, this precision means less time spent on-site trying to make pieces work together. Everything fits the first time, which saves labor and keeps your project on schedule.
Yes. Waterjet cutting handles curves, tight corners, intricate geometric patterns, and even 3D contours without any tooling changes or setup delays. The cutting stream is narrow and flexible, so it can follow complex paths that would be difficult or impossible with a blade.
This is especially useful for custom logos, decorative screens, medallions, and artistic installations where the design includes fine detail or organic shapes. You’re not limited to straight cuts or simple angles—if you can draw it, we can cut it.
Because the process is CNC-controlled, repeatability is perfect. If you need multiple identical pieces or a series of parts that fit together, every cut will match the original file with the same precision. That consistency is hard to achieve with manual methods or traditional stone cutting equipment.
We routinely cut marble up to 12 inches thick at full speed and precision. For thicker material, we can adjust pressure, slow the cutting speed, or make multiple passes to get through without sacrificing edge quality.
Thicker slabs take longer to cut, but the process remains just as accurate. There’s no loss of detail or increase in kerf width, so you still get clean edges and tight tolerances even on heavy architectural pieces or structural elements.
If your project in North New Hyde Park, NY involves thick marble for columns, cladding, or custom furniture, waterjet gives you the flexibility to work with substantial material without needing specialized tooling or secondary processes. The same system that cuts thin tile can handle thick slabs—it’s just a matter of adjusting the parameters.
In most cases, edges come off the waterjet table smooth enough for installation without heavy finishing. You might want to lightly polish or hone the edge depending on the application, but you won’t be dealing with rough saw marks, chipping, or deep tool marks that require grinding down.
The quality of the edge depends on cutting speed and abrasive flow. For parts where the edge will be visible—like countertop edges or decorative panels—we can slow the cut slightly to produce an even smoother finish right off the machine.
This saves you time and labor compared to traditional cutting methods, where edges often need significant rework before they’re ready for installation. Less finishing means lower costs and faster project completion, which matters when you’re managing multiple jobs or working against a deadline.
Waterjet cutting produces significantly less waste than traditional methods because the cutting stream is so narrow—typically around 0.04 inches. That means more usable material from every slab, which directly reduces your material costs.
We also optimize nesting when we set up your file, arranging parts to maximize yield and minimize scrap. If you’re cutting multiple pieces from a single slab, smart nesting can often fit more parts than you’d expect, especially compared to blade-based methods that require wider kerfs and more clearance between cuts.
For expensive or rare marble, this efficiency makes a real difference. You’re not throwing away 10-15% of the slab to account for cutting errors or excessive kerf width. You get more finished pieces per slab, which improves your project economics and reduces the environmental impact of stone fabrication in North New Hyde Park, NY.
Local Resources
Useful Links
Other Services we provide in North New Hyde Park
