Hear from Our Customers
You’re working with intricate architectural details or tight-tolerance fabrication specs. Traditional cutting methods introduce heat that warps metal, burns edges, or cracks brittle materials. That means rework, wasted material, and missed deadlines.
Our waterjet cutting metal in East Hampton, NY eliminates those problems entirely. The cold-cutting process uses high-pressure water and abrasive—no torches, no lasers, no thermal distortion. Your stainless steel, aluminum, brass, or copper comes off the table with clean edges and zero heat-affected zones.
You get parts that match your CAD files down to the thousandth of an inch. No secondary finishing. No surprises when you go to install. Just precision cuts that let you move forward with confidence, whether you’re an architect specifying custom panels or a contractor managing a high-end residential build.
Tri-State Waterjet serves architects, designers, contractors, and fabricators across East Hampton and the surrounding area. Our in-house design team checks your CAD files before programming—catching tolerance issues, material conflicts, or design problems that would cost you time and money on the back end.
We’re not just a waterjet metal cutting shop. We’re a resource for the high-end custom home market and commercial projects that demand precision. Our Flow Mach 500 system runs CNC-controlled cuts directly from your DXF or DWG files, so there’s no guesswork and no manual error.
East Hampton’s building and design community works on projects where quality isn’t negotiable. We built our process around that standard, and we’ve been doing it long enough to know what goes wrong when shops skip the review step.
You send us your CAD file—DXF or DWG format works best because it preserves vector precision and layer organization. Our design team reviews it within 24 hours. We’re checking for kerf width, nesting efficiency, material thickness compatibility, and any design elements that might cause issues during cutting.
Once the file is verified, we program the job directly into our CNC system. The Flow Mach 500 follows your design with precision measured in thousandths of an inch. High-pressure water mixed with abrasive garnet cuts through metal without introducing heat, so there’s no warping, no burn marks, and no stressed edges.
After cutting, we inspect each part for dimensional accuracy and edge quality. You get clean parts ready for installation or assembly—no secondary machining required unless you specify it. Turnaround depends on material availability and queue, but most custom metal waterjet cutting jobs in East Hampton, NY are completed within a few days of file approval.
Ready to get started?
You’re not just getting a cutting service. You’re getting file review by experienced designers who understand fabrication, not just software. That means fewer surprises, less rework, and parts that actually fit your project specs.
Our CNC metal waterjet cutting in East Hampton, NY handles stainless steel, aluminum, brass, copper, Inconel, Hastelloy, and other metals up to several inches thick. We cut decorative architectural screens, custom brackets, structural components, signage, and prototype parts. If your design involves tight radii, intricate patterns, or materials that crack under heat, waterjet is often the only viable option.
East Hampton’s architecture leans heavily on custom metalwork—whether it’s high-end residential projects in the estate district or commercial builds that require unique design elements. We work with contractors and fabricators who need reliable turnaround without sacrificing precision. You get minimal kerf width, which means better material utilization and lower costs per part. You also get edge quality that often eliminates the need for grinding or deburring, saving you labor on the back end.
We cut stainless steel, aluminum, brass, copper, bronze, Inconel, Hastelloy, and most other metals you’d use in architectural or industrial applications. Thickness depends on the material, but we routinely handle anything from thin gauge sheet up to several inches thick.
Waterjet works especially well for metals that are heat-sensitive or prone to warping. If you’ve had issues with laser cutting or plasma introducing distortion, waterjet eliminates that problem entirely. The cold-cutting process keeps the material’s structural integrity intact, so you’re not dealing with stressed edges or weakened zones.
If you’re unsure whether your material is a good fit, send us the specs. We’ll tell you what’s possible and what tolerances we can hold.
Our Flow Mach 500 holds tolerances within a few thousandths of an inch on most metals. That’s tight enough for parts that need to fit together without adjustment, which is critical if you’re working on architectural assemblies or precision fabrication.
Accuracy depends on material thickness, hardness, and design complexity, but we program every job with kerf compensation and nesting optimization to maintain dimensional consistency across all parts. If your project requires even tighter tolerances, we can discuss secondary operations, but most customers find that waterjet alone delivers the precision they need.
You’re also getting CNC control directly from your CAD file, so there’s no manual layout or human error in the cutting process. What you design is what you get.
You can send us concept files and we’ll help get them production-ready. Our in-house design team reviews every file before cutting, and if there are issues—like features too small for the kerf width, or design elements that won’t work with your material choice—we’ll flag them and suggest fixes.
We work with DXF and DWG files because they maintain vector precision, but if you’re working in another format, reach out. We’d rather help you get the file right than waste your material on a bad cut.
Custom metal waterjet cutting in East Hampton, NY often involves one-off architectural pieces or prototype parts where the design is still evolving. We’re set up to handle that. You’re not locked into high-volume production runs, and we’re not charging you setup fees that only make sense at scale.
Turnaround depends on material availability, job complexity, and our current queue, but most projects are completed within a few days of file approval. Simple cuts on common materials like aluminum or stainless steel can often be done faster. More complex designs or specialty metals might take a bit longer.
We’ll give you a realistic timeline when we review your file. If you’re on a tight deadline, let us know upfront—we can often prioritize rush jobs if the schedule allows.
Cutting speed itself is fast compared to manual fabrication. Our CNC system can cut large parts in a fraction of the time it would take a skilled fabricator with traditional tools, and you’re getting better accuracy and consistency across multiple pieces.
Waterjet doesn’t introduce heat, which means no warping, no burn marks, and no hardened edges that are difficult to work with after cutting. Laser and plasma both rely on thermal energy, and that changes the material properties along the cut line. If you’re working with thin metals or heat-sensitive alloys, that distortion can ruin the part.
Waterjet also handles thicker materials better than laser, and it cuts a wider range of metals without needing different gases or settings. You get clean edges with minimal burr, so there’s less finishing work required before installation or assembly.
For architectural work or high-end fabrication in East Hampton, NY, where the finished appearance and dimensional accuracy matter, waterjet is often the only method that delivers both speed and quality without compromise. You’re not choosing between fast and precise—you get both.
Yes. If you’re not sure which metal to use for your project, or if you’re concerned about how a specific material will perform under waterjet cutting, we’ll walk you through the options. Some metals cut cleaner than others, and some thicknesses work better for certain designs.
We’ve cut everything from decorative screens in thin-gauge stainless to structural brackets in thick aluminum plate. That experience means we can tell you what’s going to work and what’s going to cause problems before you commit to material costs.
Material consultation is part of the service, not an add-on. We’d rather spend a few minutes on the front end helping you choose the right metal than have you pay for material that doesn’t perform the way you expected. You’re making decisions based on real fabrication knowledge, not just what sounds good in theory.
Local Resources
Useful Links
Other Services we provide in East Hampton
