Hear from Our Customers
Your parts come off the table ready to use. No warping from heat. No secondary deburring eating into your timeline. No compromised material properties because the cutting process changed the metal’s structure.
Waterjet cutting metal in North New Hyde Park, NY means you can nest parts tighter, waste less material, and hit tolerances that matter—without the limitations of laser or plasma. The kerf width runs 0.030″ to 0.040″, so you’re maximizing every sheet.
You’re not dealing with heat-affected zones that weaken the metal or create micro-cracks. The cold cutting process keeps your stainless steel, aluminum, copper, brass, and titanium exactly as strong as when you bought it. That matters when you’re building something that needs to last or meet strict specifications.
Complex geometries don’t require tool changes or multiple setups. One file, one setup, done. Prototypes move faster. Custom parts don’t become a scheduling nightmare.
We handle precision waterjet cutting for manufacturers, fabricators, architects, and contractors across North New Hyde Park, NY and the surrounding Long Island area. We know what it takes to deliver clean, accurate cuts when your project timeline doesn’t have room for rework.
Long Island’s manufacturing sector faces real pressure—material costs keep climbing, tolerances keep tightening, and finding reliable cutting services that actually meet specs isn’t as easy as it should be. We’ve built our operation around solving that problem with CNC metal waterjet cutting that’s consistent and repeatable.
You’re working with a waterjet metal cutting shop in North New Hyde Park, NY that understands the local market. We’ve seen the challenges contractors face with decorative metalwork on high-end projects. We’ve cut parts for machinery manufacturers who need clean edges ready for welding without additional prep work.
You send us your CAD file or design specs. We review it for any potential issues with material thickness, tolerances, or nesting efficiency—and we’ll tell you upfront if something won’t work the way you’re expecting.
Once the file is dialed in, we program the CNC waterjet system. The cutting head uses a high-pressure stream of water mixed with abrasive garnet to cut through your metal. No heat means no distortion, no hardened edges, no burned material. The process is cold from start to finish.
For stainless steel, aluminum, titanium, copper, brass, or specialty alloys, the waterjet handles thickness from 0.5mm up to 50mm. Positional accuracy stays within ±0.1mm, and dynamic head compensation keeps taper virtually eliminated on thicker materials.
You get parts that are ready for the next step in your process—whether that’s welding, forming, assembly, or installation. Edges come off smooth enough that secondary finishing is often unnecessary. That’s time and money you’re not spending on extra operations.
Ready to get started?
Material consultation comes standard. If you’re not sure whether waterjet is the right process for your application, or which alloy will perform best, we’ll walk through it with you. We’ve cut enough metal in North New Hyde Park, NY to know what works and what doesn’t.
You get access to custom metal waterjet cutting for one-off prototypes or production runs. The same precision applies whether you’re ordering one part or a hundred. Tight nesting and efficient programming mean you’re not paying for wasted material or excessive setup time.
For architects and designers working on decorative or structural metalwork across Long Island, waterjet delivers the clean lines and smooth edges that high-end projects demand. Intricate patterns, sharp corners, complex curves—all handled without tool changes or multiple setups.
Manufacturers requiring repeatable, tight-tolerance parts for machinery or custom components get consistent quality. The CNC system ensures that part 50 matches part 1. When you’re building equipment or assemblies that need to fit right the first time, that consistency matters.
Waterjet handles virtually any metal alloy without the material limitations you’d hit with laser or plasma cutting. Stainless steel cuts clean from 0.5mm up to 50mm thick—no heat-affected zone, no hardened edges that make forming or welding difficult later.
Aluminum is ideal for waterjet because there’s no melting or thermal distortion. Laser struggles with aluminum’s reflectivity, but waterjet doesn’t care. You get precise cuts without any of the warping issues that come from heat-based processes.
Copper and brass cut without problems. Titanium is perfect for waterjet, especially when you’re working on aerospace or medical components where material properties can’t be compromised. We also handle specialty alloys and composites that other cutting methods can’t touch without damaging the material or losing tolerances.
Typical positional accuracy runs ±0.1mm, which translates to roughly ±0.004 inches. For most manufacturing and fabrication applications in North New Hyde Park, NY, that’s well within acceptable tolerances for parts that need to fit precisely in assemblies or machinery.
Dynamic head compensation technology eliminates the taper you’d normally see on thicker materials. When you’re cutting 25mm or 50mm stainless steel, the top edge and bottom edge of the cut match within a few thousandths. That matters when you’re welding or forming parts afterward.
The kerf width stays narrow—0.030″ to 0.040″—so you can nest parts tighter and get more pieces out of each sheet. Repeatability is consistent across production runs because the CNC system follows the same programmed path every time. Part 100 matches part 1.
Edges come off the waterjet table with a satin-smooth finish that’s often ready for welding, forming, or assembly without additional deburring. You’re not spending extra time or money on secondary operations just to make the parts usable.
The cold cutting process doesn’t create hardened edges or heat-affected zones that you’d need to grind down or treat. Material properties stay unchanged from the original sheet or plate. That’s critical when you’re working with metals where strength and structural integrity can’t be compromised.
For decorative metalwork or architectural applications across Long Island, the edge quality is clean enough for visible installations. You’re not dealing with rough cuts that need extensive finishing before they’re acceptable for high-end projects.
Laser creates a heat-affected zone that can weaken the metal, cause micro-cracks, and change material properties. Waterjet is a cold process—no heat means no distortion, no hardened edges, no compromised strength. When you’re cutting parts that need to maintain their original material specifications, that difference matters.
Laser struggles with reflective metals like aluminum, copper, and brass. Waterjet cuts them without any issues. Thicker materials are also easier with waterjet—cutting 50mm stainless steel with laser either takes forever or doesn’t work well, but waterjet handles it cleanly.
Edge quality from waterjet is often better for thicker materials. You’re not dealing with dross or slag that needs to be cleaned off. The narrow kerf and lack of thermal distortion mean parts come out flat and true, not warped from heat stress.
Turnaround depends on material thickness, part complexity, and current queue, but most projects move through faster than you’d expect. Simple parts in common materials like stainless steel or aluminum can often be cut within a few days of file approval.
Complex geometries or thicker materials take longer because the cutting head moves slower to maintain precision, but you’re still avoiding the multi-step processes that other methods require. No tool changes, no multiple setups, no secondary deburring eating into your timeline.
For North New Hyde Park, NY manufacturers working on tight deadlines, we’ll give you a realistic timeframe upfront. Rush jobs are possible when the schedule allows. The key is getting us a clean CAD file and clear specs early so we’re not troubleshooting design issues that delay the cut.
Both. The CNC system makes production runs efficient because once the program is set, it repeats exactly. You get the same precision on part 50 as you did on part 1. For manufacturers in North New Hyde Park, NY who need consistent, repeatable parts, that reliability is what keeps production moving.
Small batches and one-off custom parts work just as well. There’s no expensive tooling to create or minimum order quantities to hit. If you need five parts for a prototype or a custom build, waterjet handles it without the setup costs that make small runs impractical with other cutting methods.
Material efficiency stays high regardless of quantity. Tight nesting means you’re not wasting sheet metal on excessive spacing between parts. For medium and high-volume jobs, that adds up to real cost savings over time.
Local Resources
Useful Links
Other Services we provide in North New Hyde Park
